CHEMLINK POLYMER INNOVATION
M1® Sealant & Adhesive
(SKU-F1270)
M1 Sealant & Adhesive is a moisture cure, multi-purpose structural adhesive/sealant designed for bonding and sealing a wide range of construction materials. M1 Sealant forms a tough elastic waterproof seal to most roofing materials, masonry, wood, glass, aluminum and foam. M-1 bonds well to most building surfaces including: metal flashing, copings, skylights, and HVAC surfaces.
BENEFITS
- Moisture curing, polyether adhesive/sealant designed for applications in damp, dry, or cold climates.
- Solvent free and contains no isocyanates.
- Will not shrink upon curing, will not discolor when exposed to UV light, and can not “out-gas”, or bubble on damp surfaces as urethane sealants often do.
- Capable of joint movement in excess of 35% in both compression and extension. M-1® can be used effectively in many difficult construction site conditions such as wet or dry climates and at temperatures as low as 32°F (0°C).
ADVANTAGES
- Solvent free, 100% solids will not shrink
- Non-slump, applies vertically and overhead
- 20 minute skin over
- No outgassing on damp surfaces
- Good color stability, will not suntan
- Paintable within 24 hours (See limitations)
- Gun grade, no special tools or mixing required
- Application at temperatures as low as 32°F (0°C)
INSTALLATION
Bonding surfaces should be clean, dry and free from all contamination that may inhibit the sealant’s performance. Isopropyl alcohol is an effective cleaner for surface preparation. Install all joint applications per ASTM and SWRI recommendations and guidelines. Please contact customer service for application guidelines for temperatures below 32 degrees F (0 degrees C). Maintain sealant at room temperature before application to ensure adequate tooling and adhesion. This product sets rapidly upon exposure to moisture.
PRODUCT DOCUMENTS
Reviews
There are no reviews yet.