Name: Vertical Guardrail System #12045
SKU: 12045
Availability: OutOfStock

ACRO BUILDING SYSTEMS

Vertical Guardrail System For Parapet Walls & Open Edges (#12045)

The Vertical Guardrail System model 12045 which is designed for fall protection on low pitch roofs, including parapet walls. This unique system is designed to be anchored on the outside of a parapet wall so that work can be done to the decking and cap without interference from the fall protection system. Its Durability and versatility also makes it ideal for temporary guardrailing around most openings or edges (skylights, stairwells, elevator shafts, etc). 2 x 4 construction grade lumber is used for cross rails.

In 2012 Acro introduced the Vertical Guardrail System model 12045 which is designed for fall protection on low pitch roofs, including parapet walls. This unique system is designed to be anchored on the outside of a parapet wall so that work can be done to the decking and cap without interference from the fall protection system. The 12045’s durability and versatility also makes it ideal for temporary guardrailing around most openings or edges (skylights, stairwells, elevator shafts, etc). 2 x 4 construction grade lumber is used for cross rails. The design was updated in 2013 to allow for clearance of 2” parapet caps and drip edges and also to allow for post height adjustment.

The 12045’s durability and versatility also makes it ideal for temporary guardrailing around most openings or edges (skylights, stairwells, elevator shafts, etc). 2 x 4 construction grade lumber is used for cross rails. The design was updated in 2013 to allow for clearance of 2” parapet caps and drip edges and also to allow for post height adjustment.

Capable of multiple applications including flat roofs, metal roofs, parapets, skylights, stairwells, elevator shafts, etc.
Mounts to Any Vertical Surface: Parapet Walls, Header Beams, Floor Joists, Wall Studs, Roof Trusses.
Bracket can be screwed or bolted to lumber or masonry
Easily Make Temporary Guardrail Around Holes / Edges
Post holder is recessed from mounting plate 2”; for clearance of parapet cap & drip edges
System comes with bracket & post
Maximum spacing 8’ apart (used with construction grade lumber)
Complies with OSHA regulations
#12055 Posts are Interchangeable with all Acro Guardrail Systems
Powder coated safety yellow

Weight	7 lbs
Dimensions	53 × 12 × 2 in
Brand	Acro Building Systems

INSTALL INSTRUCTIONS

12045 Vertical Guardrail System Instructions:

General:

1) Always erect and use in accordance with local, state and federal OSHA regulations.

2) Not an anchor point.

3) Roofing guardrails are meant for use by experienced tradesmen having full knowledge in its use.

4) OSHA regulations require that employer provide training in the use
and care of this product.

Mounting the 12045 bracket:

1) Install the abp#12045 bracket into an approved structure capable of withstanding a 200 lbs load in the direction that the fall would occur (Outer edge).

2) Three screw holes on each side of the #12045 bracket shall be filled with #12 x 2.5’’ screws or approved equivalent. Three of the six fasteners shall fully penetrate a truss or framing member to fully achieve the proper holding power.

3) Other methods of mounting the 12045 bracket is to bolt the plate through decking with the use of six ¼”’
lag bolts with washers

4) Spacing between bracket shall not be more than eight (8) feet apart.

Instructions for Use of 12045:

1) Once the bracket is mounted, place post (12055) in socket and slide
construction grade lumber (2”x4” nom.) through 12055 pockets to create a continuous guardrail system meeting OSHA requirements 29CFR-1910.23 & 1926.502. Overlap 2 x 4’s at the 12055 post. Secure 2 x 4’s to post w/nails.

Vertical Guardrail System #12045

Vertical Guardrail System is designed to be anchored on the outside of a parapetwall so that work can be done to the decking and cap without interference.

Vendor Part #: 12045

SKU: 703397-12045-9

Category: Safety Guardrail Systems

ACRO BUILDING SYSTEMS

Vertical Guardrail System For Parapet Walls & Open Edges (#12045)

INSTALL INSTRUCTIONS

12045 Vertical Guardrail System Instructions:

General:

1) Always erect and use in accordance with local, state and federal OSHA regulations.

2) Not an anchor point.

3) Roofing guardrails are meant for use by experienced tradesmen having full knowledge in its use.

4) OSHA regulations require that employer provide training in the use and care of this product.

Mounting the 12045 bracket:

1) Install the abp#12045 bracket into an approved structure capable of withstanding a 200 lbs load in the direction that the fall would occur (Outer edge).

2) Three screw holes on each side of the #12045 bracket shall be filled with #12 x 2.5’’ screws or approved equivalent. Three of the six fasteners shall fully penetrate a truss or framing member to fully achieve the proper holding power.

3) Other methods of mounting the 12045 bracket is to bolt the plate through decking with the use of six ¼”’ lag bolts with washers

4) Spacing between bracket shall not be more than eight (8) feet apart.

Instructions for Use of 12045:

1) Once the bracket is mounted, place post (12055) in socket and slide construction grade lumber (2”x4” nom.) through 12055 pockets to create a continuous guardrail system meeting OSHA requirements 29CFR-1910.23 & 1926.502. Overlap 2 x 4’s at the 12055 post. Secure 2 x 4’s to post w/nails.

2) Construction grade lumber (2”x6” nom.) can also be secured to abp#12045 bracket to provide toe board.

Care And Maintenance of 12045:

1) Inspect all equipment before and after each use to be sure that there is no damage or deformation to any of the equipment.

2) Inspect to be sure there is no deterioration as a result of rusting. Discard if necessary.

3) Any equipment subjected to the forces of a fall arrest must be removed from service immediately.

4) Always handle the equipment with care to ensure safe and lasting use.

5) Do not throw or drop any equipment from height.

6) Do not use if exposed to extreme heat or cold. Discard at once.

7) Do not use if wet or frozen.

DOCUMENTS

ACRO 12045 Specs

ACRO 12045 Install Instructions

Acro 12045 Test Report

Universal Guardrail vs Wood

12045 Guardrail Tip Up

Reviews

There are no reviews yet.

Related products

Sausage Gun Kit with Case and Accessories

E-Curb/Minicurb, Complete Kits

Parapet Guardrail Bracket & Post

Flat Roof Guardrail Bracket & Post

4) OSHA regulations require that employer provide training in the use
and care of this product.

3) Other methods of mounting the 12045 bracket is to bolt the plate through decking with the use of six ¼”’
lag bolts with washers

1) Once the bracket is mounted, place post (12055) in socket and slide
construction grade lumber (2”x4” nom.) through 12055 pockets to create a continuous guardrail system meeting OSHA requirements 29CFR-1910.23 & 1926.502. Overlap 2 x 4’s at the 12055 post. Secure 2 x 4’s to post w/nails.

1) Inspect all equipment before and after each use to be sure that there
is no damage or deformation to any of the equipment.